|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is accurate and of high quality. It is only volume 2 of the service manual. This is schematic, parts lists, and exploded mechanical drawings. The theory of operation and the diss-assembly instructions are in volume 1. The unit can be tricky to dis-assemble portions of so the volume 1 manual can be important. The product description of the manual is accurate but it does not say anything about volume 1 and the image of the front page does clearly say Volume 2.
 ;
Wellll again thank you very much fast and effective. Clear and well done for such an old TV!!!!
 ;
It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
 ;
Another excellent buy! File too clear and explanatory.
b Lower the other end of the pick-up roller until it rests on the bottom of the carriage. Figure 7-18Replacing the Pickup Roller
4
Slide the slotted end of the pickup roller�s shaft into the white bushing. Rotate the roller while sliding it so that its slotted shaft rests over the drive shaft. The black bushing will not fit if the slotted end of the pickup roller�s shaft is not properly inserted over the drive shaft.
Figure 7-19Inserting the Pickup Roller back in the White Bushing
5
Slide the black bushing through the carriage opening and over the non-slotted end of the pickup roller�s shaft. The tab on the black bushing must be oriented so that it will fit through the keyed opening on the carriage. If the black bushing does not fit, the slotted end of the pickup
C4170-90959
Parts Removal Tree 167
|
|
 |
> |
|